New Groom, New Grow.
#1
Posted 18 May 2014 - 12:20 PM
by documenting the groom build before the grow starts. The new groom will be a supergro maxi 2m x 2m x 2.2m high
tent, with my home built RDWC. The lighting will be 2 = 400/600 digital dimmable ballasts, using Metal Halide and HPS
under 2 = 800mm Parabolic shades. Extraction will be through a 6" Ruck fan and a Rhino carbon filter. Air intake will be
from a 4" Ruck fan. If needed i have also got other ruck fans for extraction and intake. The groom will also have
humidifiers, dehumidifiers, AC unit, various fans and other bits and bobs. All controlled by a Ecotechnics Evolution
digital fan controller. The room the tent will be in will also be covered in kingspan where needed. I've taken the old
groom apart and got the room ready for the groom. The kingspan is turning up tomorrow, so i should be able to start
the build Monday. I'll get some pics up as soon as i can, when i sus out how to.
Thanks for looking in, D.
- Budgie, marque08, MrG and 7 others like this
#2
Posted 18 May 2014 - 04:33 PM
- fairy likes this
#3
Posted 19 May 2014 - 06:59 AM
- Austin likes this
#4
Posted 19 May 2014 - 12:20 PM
- DreDdYBoY likes this
#5
Posted 19 May 2014 - 02:22 PM
#6
Posted 19 May 2014 - 05:59 PM
Sounds real good nice bit of space and lighting there
Thanks Dekay, nice of you to say so.
#7
Posted 19 May 2014 - 06:14 PM
Pics as promised, i had to paste and copy them from another site as it was the only way i could do it.
Old tent coming down.
All the bits dismantled.
And the room ready for the kingspan.
Next couple of pics shows how tight the tent is.
Next job is to move the light over to the right hand side into the alcove.
- Budgie, 1984, MrG and 1 other like this
#8
Posted 19 May 2014 - 06:23 PM
Pics as promised, i had to paste and copy them from another site as it was the only way i could do it.
Old tent coming down.
All the bits dismantled.
And the room ready for the kingspan.
Next couple of pics shows how tight the tent is.
Next job is to move the light over to the right hand side into the alcove.
i cant see the pics bro
#9
Posted 19 May 2014 - 06:37 PM
- dal likes this
#10
Posted 19 May 2014 - 07:22 PM