Hi peeps, this how to is only a quick how to, as I've just got my old home made humidifier out the shed and thought I'd share how I built it. I will be skipping a few bits of the build as It's already done, but I will; explain what to do.
What you need.....You can change things to your own specification if you want, but this humidifier is plenty enough to do the job in my 2m x 2m tent.
1= 35 Ltr tote box.
2= PC fans (arctic F12 Pro pwm) I use these but you can use what you like.
1= old phone charger.
1= piece of 4" stack pipe.
1= 3 head fogger, transformer and fogger float.
1= glue gun.
Some shrink tube.
First off cut out 3 holes in the lid of the tote box just a bit smaller than the 4" piece of stack pipe.
Then get the fans and the phone charger and splice the fan wires onto the phone charger wires. But as you do each wire cover it with a piece of shrink tube and seal it by shrinking the tube around the bare wires 1 at a time. This bit is very important as you must not let any of the bare wire show. That's the fans wired up.